Ikelite RC2 TTL Receiver for DS Strobes

1.119 DKK

(incl. VAT)

Transform the electrical bulkhead of your Ikelite DS strobe into a fiber optic connection to enable compatibility with compatible Ikelite TTL Fiber Optic Transmitters.


Model/Product no.: 4414
Stock status: Assembled on order and shipped.
psc.

All custom fees paid on European orders

(islands and special locations excepted)

Fast delivery 1-3 week days

If you order before 14.00

Customer service and support

VAT reverse charge where applicable

on business orders


Each strobe requires an individual RC2 TTL Receiver along with a compatible fiber optic cord. If you're using two strobes, you'll need two receivers. This product is designed to attach to an Ikelite DS strobe. It's important to note that it's not intended for attachment to a housing, and it won't function if connected to a housing bulkhead. Additionally, this receiver is only compatible with Ikelite strobes and specifically digital models. For more details on housing and strobe compatibility, please refer to the information provided below.

Each strobe requires an individual RC2 TTL Receiver along with a compatible fiber optic cord. If you're using two strobes, you'll need two receivers. This product is designed to attach to an Ikelite DS strobe. It's important to note that it's not intended for attachment to a housing, and it won't function if connected to a housing bulkhead. Additionally, this receiver is only compatible with Ikelite strobes and specifically digital models. For more details on housing and strobe compatibility, please refer to the information provided below.

Manual Strobe Exposure

You can adjust the strobe's output using the manual power settings available (which may vary by model). Ensure that the camera's flash mode is set to manual. Select the minimum flash output required on the camera to trigger the DS strobe. This helps preserve the camera's battery power.

Camera and Housing Compatibility

Ikelite housing models equipped with the TT5 Canon TTL Transmitter #44701.

Strobe and Cord Compatibility

Fiber Optic Cord Compatibility:

(recommended) Ikelite Fiber Optic Coiled Cord # 4501
INON Optical D Cable "Non-wireless type" L-Connector
SEA&SEA Fiber Optic Cable (L-type) # 50107
SEA&SEA Fiber Optic Cable II # 50128
Olympus UW Fiber Optic Cable PTCB-E02
Nauticam Optical Fiber Cable # 26211 Nauticam to INON
Nauticam Optical Fiber Cable # 26212 Nauticam to Sea&Sea

Consult with your housing manufacturer for information on what type of fitting is provided at the housing end. The fiber optic ports on Ikelite housings are made to the same standard as SEA&SEA and Olympus brands.


Strobe Compatibility:

Ikelite DS50 above serial # 70000
Ikelite D51
Ikelite DS125 above serial # 5000
Ikelite DS160, DS161, DS162
Ikelite DS200 above serial # 7163
Ikelite DS230, DS232

This product is not compatible with non-digital Ikelite strobes, SEA&SEA, INON, or other non-Ikelite strobes

In the Box

TTL receiver
Connector protector
Silicone lubricant 1cc tube