USB Charging & Data Transfer Bulkhead for 200DL and 50DL Underwater Housings

1.464 DKK

(incl. VAT)

If you're looking for a convenient solution to save time and reduce stress during your dive trips, consider the USB Charging & Data Transfer Bulkhead. It can be installed in the M16 port of select 200DL Underwater Housings. To connect the bulkhead to your camera inside the housing, you can use the Hyper-Flex USB-C to USB-C Cable.

With this setup, you can attach a high-quality USB-C cable (3.0 or above, not included) from the outside of your housing. This allows you to charge your camera and transfer photos and videos to your laptop. When you're ready to go diving, simply replace the waterproof cap on the bulkhead.

Please refer to the housing compatibility information below.

Model/Product no.: 46007

Stock status: In stock

psc.

All custom fees paid on European orders

(islands and special locations excepted)

Fast delivery 1-3 week days

If you order before 14.00

Customer service and support

VAT reverse charge where applicable

on business orders

Description

USB Charging & Data Transfer Bulkhead for 200DL and 50DL Underwater Housing

This item is compatible with the following 50DL and 200DL Underwater Housings:

Nikon Z6, Z6 II, Z7, Z7 II # 71063
Nikon Z50 # 71065
Nikon Z5 # 71067
Sony a7R IV, a9 II # 71474
Sony a1, a7S III # 71476
Sony a7C # 71477
Sony a7 IV, a7R V # 71479
Canon EOS R # 71760
Canon EOS RP # 71762
Canon EOS R5 # 71764 or 73764
Canon EOS R6, R6 II # 71766 or 71768

Please note that this bulkhead is not compatible with Ikelite 200DL Underwater Housings for DSLR cameras or 200DLM Underwater Housings due to spatial limitations. Compatibility with other housing models has not been confirmed, except for the ones listed above.

Spacial Requirements

The bulkhead is designed to fit into an M16 threaded accessory port.
Housings must have a minimum of 3/4" free space between the USB-C port on the camera and the inside left of the housing when viewed from the back.
Housings must have a maximum of 4" between the USB-C port on the camera and the inside bottom of the M16 port.

For a visual reference of the spacing requirements, please refer to the product photos.

What's in the box?

USB-C Bulkhead
Hyper-Flex USB-C to USB-C 40Gbps Cable
Silicone Lubricant 1cc Tube